Unit of Measure
Technical Information
Thickness of Paper by Caliper |
N/A 7.5 mil |
Substance Weight |
N/A 123.5 Ib/ream |
Substance Size |
N/A 25 x 38 in |
Face Paper
Face Paper Information |
N/A Jetgloss on-demand, high gloss coated paper designed to be compatible with dye and pigmented ink jet inks. |
Substance Weight (Face Paper) |
N/A 59 Ib/ream |
Substance Size (Face Paper) |
N/A 25 x 38 in |
Test Method for Substance Weight (Face Paper) |
N/A ISO536 |
Thickness of Paper Measure by Caliper (Face Paper) |
N/A 3.9 mil |
Thickness Measurement Instrument (Face Paper) |
N/A Caliper |
Test Method for Thickness of Paper by Caliper |
N/A ISO534 |
Opacity (Face Paper) |
N/A 88 % |
Test Method for Opacity (Face Paper) |
N/A ISO2471 |
Gloss (Face Paper) |
N/A 45 % |
Test Method for Gloss (Face Paper) |
N/A ISO8254-1 |
Adhesive
Adhesive Information |
N/A RP51, Modified acrylic dispersion. Permanent adhesive with good adhesion to all normal substrates, including non-polar surfaces, films and corrugated board. Good low temperature performance. |
Minimum Tack Force (Adhesive) |
N/A 14 N |
Test Method for Minimum Tack Force (Adhesive) |
N/A FTM 9 |
Minimum Shear Time (Adhesive) |
N/A 3.0 h |
Test Method for Minimum Shear Time (Adhesive) |
N/A FTM 8 |
Minimum PE-Loop Tack Force |
N/A 10 N |
Test Method for Minimum PE-Loop Tack |
N/A Modified FTM 9 |
Minimum Labeling Temperature |
N/A 32 ºF |
Service Temperature Range |
N/A -4 to 176 ºF |
Note for Adhesive |
N/A Not recommended for labelling highly curved surfaces. Shelf Life: From the date of manufacture 4 years at 68 ºF and RH 50% |
Liner
Liner |
N/A 2.8 mil White Kraft, White kraft liner. For VIP label stock where good lay flat properties are required. |
Substance Weight (Liner) |
N/A 47 Ib/ream |
Substance Size (Liner) |
N/A 24 x 36 in |
Test Method for Substance Weight (Liner) |
N/A ISO536 |
Thickness of Paper Measure by Caliper (Liner) |
N/A 2.8 mil |
Thickness Measurement Instrument (Liner) |
N/A Caliper |
Test Method for Thickness of Paper Measure by Caliper (Liner) |
N/A ISO534 |
Tensile strength Machine Direction (MD) (Liner) |
N/A 42 lbf/in |
Test Method for Tensile strength Machine Direction (MD) (Liner) |
N/A ISO1924 |
Tensile Strength Cross Direction (CD) (Liner) |
N/A 16 lbf/in |
Test Method for Tensile Strength Cross Direction (CD) (Liner) |
N/A ISO1924 |
Specifications
Thickness |
N/A 2.8 mil |
Material |
N/A White Kraft |
Shelf Life |
N/A 4 y |
Shell Life Temperature |
N/A 68 ºF |
Shell Life Relative Humidity (RH) |
N/A 50 % |
Liner Thickness |
N/A 2.8 mil |
Additional Information
Additional Information |
N/A The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage which may be caused using the product. |
