Facestock:
Flock is a highly, dull matte coated paper. Good printing with screen, solvent and water based flexo ink systems. Fair letterpress printing with UV ink systems. Not recommended for offset printing. This facestock can be imprinted.
Unit of Measure

Face Stock

Basis Weight Per Ream (Facestock)

N/A 60 lb

Basis Weight Tolerance (±) (Facestock)

N/A 10 %

Number of Sheets (Facestock)

N/A 500

Sheet Size (Facestock)

N/A 25 x 38 in

Paper Thickness (Caliper) (Facestock)

N/A 0.036 in

Paper Thickness Tolerance (±) (Caliper) (Facestock)

N/A 10 %

Tensile Strength Width Machine Direction (MD) (Facestock)

N/A 32 lb/in

Tensile Strength Width Cross Direction (CD) (Facestock)

N/A 17 lb/in

Tear Strength Machine Direction (MD) Per Sheet (Facestock)

N/A 60 g

Tear Strength Cross Direction (CD) Per Sheet (Facestock)

N/A 64 g

Stiffness Machine Direction (MD) (Facestock)

N/A 170 mg

Stiffness Cross Direction (CD) (Facestock)

N/A 90 mg

Adhesive

Type

N/A Emulsion Acrylic

Minimum Application Temperature

N/A +40 ºF

Service Temperature Range

N/A -65 to +180 ºF

Adhesive

N/A R5195 is a general-purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. It offers consistent level of adhesion and long-term removability across a wide variety of substrates.

Typical Performance Data

Average Loop Tack Weight (Glass)

N/A 1.0 lb

Average Peel Adhesion (Glass)

N/A 0.9 lb

Average Loop Tack Weight (Corrugated)

N/A 0.5 lb

Average Peel Adhesion (Corrugated)

N/A 0.6 lb

Average Loop Tack Weight (High Density Polyethylene (HDPE))

N/A 1.0 lb

Average Peel Adhesion (High Density Polyethylene (HDPE))

N/A 0.75 lb

Typical Performance Data Information

N/A Tested with 60# C1S paper at room temperature on standard lab panels.

Liner

Basis Weight Per Ream (Liner)

N/A 4.5 lb

Basis Weight Tolerance (±) (Liner)

N/A 10 %

Number of Sheets (Liner)

N/A 500

Sheet Size (Liner)

N/A 24 x 36 in

Paper Thickness (Caliper) (Liner)

N/A 0.00245 in

Paper Tolerance (±) (Caliper) (Liner)

N/A 10 %

Tensile Strength Width Machine Direction (MD) (Liner)

N/A 41 lb/in

Tensile Strength Width Cross Direction (CD) (Liner)

N/A 17 lb/in

Tear Strength Machine Direction (MD) (Liner)

N/A 37 g

Tear Strength Cross Direction (CD) (Liner)

N/A 45 g

Liner

N/A A bleached supercalendered 40# Kraft stock featuring high internal strength, toughness and tear resistance. Used primarily for roll-to-roll label applications.

Construction

Approximate Caliper Total Construction Size

N/A 0.0069 in

Approximate Caliper Total Construction Tolerance (±)

N/A 10 %

Shelf Life

Shelf Life

N/A Unless specified otherwise in this document, one year when stored at 72 °F at 50% RH

Statement of Practical Use

Statement of Practical Use

N/A As with all pressure sensitive materials, this product should be tested thoroughly under end-use conditions to ensure it meets the specific application.