3232 is a 1/32" thick white closed cell, cross-linked polyethylene foam coated on both sides with a high performance acrylic based adhesive with a white kraft liner.
Unit of Measure
Specifications
Color |
N/A White |
Materials |
N/A Foam Polyethylene (PE) |
Product Taped |
N/A Muntin Bars |
Tape Features |
N/A Double Coated |
Properties
Peel Adhesion Strength1 | N/A 75 oz/in0.8175 N/mm |
Test Method for Peel Adhesion Strength |
N/A PSTC-101 |
Tack Weight2 | N/A 28 oz800 g |
Test Method for Tack Weight |
N/A ASTM D2979 |
Tensile Strength |
N/A 107 oz/in11.61 N/10 mm |
Test Method for Tensile Strength |
N/A PSTC-131 |
Elongation |
N/A 355 % |
Test Method for Elongation |
N/A PSTC-131 |
Minimum Application Temperature |
N/A 10 ºF-12 ºC |
Maximum Continuous Use Temperature3 | N/A 180 ºF82 ºC |
Maximum Short Term Exposure Temperature |
N/A 203 ºF95 ºC |
Typical Applications
Typical Applications |
N/A Plastic Extrusion Signage Trim and Simulated Divided Lite (SDL) (Muntin Bars) Wire Mounts Wire Raceways |
Features & Benefits
Features & Benefits |
N/A
|
Note
Note |
N/A For maximum adhesion, bonding surfaces should be clean, dry, and free from grease and oils. The firmer the application pressure and the greater the contact area, the stronger the bond. Bond strengths will increase as a function of time as the adhesive continues to wet out the bonding surfaces. |
- 1 Foam Destruction
- 2 Tack numbers may not be exact value of tack as foam can tear during tack test
- 3 The pressure sensitive adhesive used in this tape construction will perform at higher than the listed temperatures. The temperature limits are due to the polyolefin foam substrate.